Leibinger JET3 Series Operating Manual page 200
Hide thumbs
Also See for JET3 Series:
- Operating manual (378 pages) ,
- User manual (233 pages) ,
- Service manual (6 pages)
Table of Contents
Advertisement
Page 198
Font preview
The font preview shows all characters of the currently loaded font. The printer software
works with 8-bit ASCII fonts which means you have a maximum of 192 printable
characters per font. Using the scroll bar you can scroll through all available characters of
the currently loaded font. When you select one of the characters it is marked with a red
frame and displayed in the drawing area. Edited characters will also be displayed in the
preview area as soon as changes are applied with the <Accept> button.
The selected character
is marked with a red
frame in the font
preview and displayed
in the drawing area.
There is a status indicator at the bottom side of the preview area. It shows the decimal
value of the ASCII code for the currently selected character and the corresponding
standard ASCII character. The displayed standard ASCII character may differ from the
character in the preview. There are two reasons for this: either the character was
modified with the font editor or there is no character defined for the currently selected
ASCII code.
Example:
The decimal ASCII value of the character "a" is 97 and the standard ASCII
character is "a". After editing the character it looks different and it will be printed
in that new design. Nevertheless the ASCII values remain the same.
Release 2.02
Job Editor
Changes are not visible
in the font preview as
long as the changes are
not applied with the
<Accept> button.
1
After clicking the
<Accept> button the
edited character is
displayed in the
preview.
2
Group 8
Enlarged view of the
edited character in
the font preview
area.
JET3 Series
Advertisement
Table of Contents
