Page 196
The font editor is started from the main window of the printer. To start the font editor
choose the respective menu item from the drop-down menu (3):
<Extra>-<Editors>-<Font editor>.
The user interface of the font editor consists of various components:
Menu bar
With the drop-down menus of the menu bar (4) you can select various commands, options
and tools. The following drop down menus are available:
1
2
3
4
5
Options <File> menu
File:
The <File> menu provides all standard operations for file handling:
New (1): A new font file is created. In a first step you will have to define
Open (2): Opens a standard file dialog box to open a stored font from the
Save (3): Saves the current file. If the current file is still unnamed a
Save as (4): Opens a standard file dialog box to save the current file.
Close (5): Closes the current file. If there were made any changes to the
Edit:
The <Edit> menu provides several standard commands for drawing
objects:
Cut (6): Cuts out a selected area (see: <Function>-<Selection>) and
Copy (7): Copies a selected area (see: <Function>-<Selection>) and
Paste (8): In the status bar of the drawing area you will be asked to place
Release 2.02
6
7
8
9
Options <Edit> menu
the size of the editor and the grid (measured in dots)
file system (hard disk, SD-card or USB-stick)
standard file dialog box will open and you will have to specify the file
name and the storage location
You will have to specify the file name and the storage location
file you will be asked whether you like to save them.
stores it in the clipboard until you use the <cut> or <copy> command
again.
stores it in the clipboard until you use the <cut> or <copy> command
again.
the cursor in the upper left corner of the drawing area but this is not
mandatory.
Job Editor
10
11
12
13
14
15
16
Options <Func.>menu
Group 8
17
18
19
20
Options <View> menu
JET3 Series