Counter Assignment; Figure 132 Settings For Counter Assignment - Leibinger JET3 Series Operating Manual

Page 248

8.4.6 Counter assignment

With this function you can assign a counter to an object in order to create a periodically
repeated object.
Basically a counter can be assigned to all kinds of objects:
 Text objects
 Barcode objects
 Graphic objects
 Time/Date objects
 Counter objects
 Shift code objects
 External text objects
With an activated assigned counter you can define at which counter reading the object
shall be printed. With this function it is possible to create a print job with periodically
repeated elements. See example for details.
Please see details regarding the counter function in chapter
8.7.3.1 Counter parameter
Figure 132 Settings for counter assignment
Check box Print, when counter
=end value
With this box checked a counter is
assigned to the object.
Arrow keys Counter ID
With these spin buttons you choose the
required counter. You'll have to make sure
that there is a counter object defined in the
job and and that the correct ID is set.
If there's no counter defined in the
current print job or in case you set the
wrong ID the counter assignment
settings will be ignored.
Selected counter object
Release 2.02
Job Editor
Settings for counter assignment
Non-printable counter in the preview of
the job editor
Group 8
JET3 Series