Leibinger JET3 Series Operating Manual page 188

Page 186
2. Change counter values (Figure 87)
 Change the value of the counter with the arrow keys (7). The value of the
counter is increased or reduced in single steps by pressing the accordant buttons.
Or
 Click in the Counter input field (4). The Numeric keypad (8) opens for input.
 If there are 2 product counters defined each of them has to be set separately. The
product counter dialog box has to be re-opened for that procedure.
 Confirm the value change by pressing the button <Set> (5) or cancel the process
with the button <Cancel> (6).
 The set value is now displayed in the status field <Production Counter> of the
main window.
 This procedure has to be carried out for each product counter separately. The
dialog box has to be re-opened to set the second product counter.
Release 2.02
ATTENTION
Please check whether there are counter objects (job counters) defined
for the currently loaded job. If there are counter objects (job counters)
whose method for the <Counter reset> is set to „production
counter", they will be also reset. The reset method "production
counter" for <Counter reset> is only available for the 1. product
counter.
You will find further information regarding the counter reset methods in
the chapter 8.7.3.1.10 Counter reset (methods)
INFORMATION
You will find further information regarding the working with Numeric
keypads in the chapter 6.4.1 Numeric keypad
Job Editor Group 8
JET3 Series