Printgo-Gate /Print Start Control; Figure 152 - Printgo-Gate /Print Start Control - Leibinger JET3 Series Operating Manual

Page 270
8.5.2.9 PrintGo-Gate - Print start control
This function offers an additional option to control the print start. With this function
enabled the printout starts only as long as the monitored sensor is active during the
PrintGo signal.
The inputs for the sensor signals are located on the connector of interface X5 of the
LEIBINGER Printer.
Figure 152

PrintGo-Gate /Print start control

Activating options:
 High-Level active:
 Low-Level active:
Release 2.02
Gate
PG signals
Gate
PG signals
Job Editor Group 8
Signals are
not
processed
JET3 Series