Language And Units; Figure 42 Set Language And Keyboard - Leibinger JET3 Series Operating Manual

Page 120

7.3.1.1 Language and units

The printer allows the selection of the operation language, the ISO-fonts which are
assigned to the keyboard as well as the used measuring unit. The parameters which are
set currently are displayed in the drop-down lists.
1. Menu language:
The available menu languages are listed in the drop-down list. The available
languages depend on the ordered version of the printer.
Note:
The function is also helpful to simplify the communication (e.g. in case of
service) with the dealer or the LEIBINGER service-hotline because English
language can be generally selected irrespectively of the installed language
package.
With the selected language the accordant ISO-font is assigned automatically to the
keyboard.
2. Additional Asia Keyboards:
The Drop-down list offers several special Asia keyboards which are not covered by
the standard fonts.
Annotation:
The allocation of a special additional Asia Keyboardis may also be reasonable
e.g. if you have to create characters of another language group additionally to
the standard characters of the set language. These characters are then available
in the advanced font of the keyboard.
Figure 42 Set language and keyboard
1
2
1 – Dialog box <Basic settings>
2 – Tab <Language/Unit>
Release 2.02
Job Editor
3 – Drop-down list <Language>
4 – Drop-down list <Keyboard>
Group 8
3
4
JET3 Series