Extern Text Mailing - Database Settings; Figure 179 Extern Text Mailing - Database Settings - Leibinger JET3 Series Operating Manual

Page 348
8.7.5.3.2 Extern Text Mailing – Database settings
See figure 179
Firstly you have to connect the USB stick to the USB port of the Printer printer. In the
next step you will have to set the parameter for the database. The database settings are
an option of the <Extra> drop-down menu (1).
Pressing the <Select> button of the dialog box (2) will open an <Open File> dialog box
(3). Selecting "USB" from the drop-down list (4) will show the *.ljd files on the USB stick
(5).
Choose the requested file and confirm with the <Select> button (7). You can leave this
dialog box without any changes by pressing the <Cancel> button (6).
Now some basic information of the loaded data file is shown in the database settings
dialog box. There are display fields which show the number of the first (8) and the last
record (9) and the number of the last printed record (10).
You will have to check off the check box <Activate database> (13) before you can
leave the dialog box with the <OK> button (12) to confirm the settings. You can leave
the dialog box without changes by pressing the <Cancel> button (11).
Figure 179 Extern Text Mailing – Database settings
1
1 – Option <Database Settings>
2 – <Select> button
3 – <Open File> dialog box
4 – Drop-down menu file source
5 – File list
6 – <Cancel> button
7 – <Select> button
Release 2.02
Job Editor
8 – Number of first data set
9 – Number of last data set
10 – Number of last printed data set
11 – <Cancel> button
12 – <OK> button
13 – Check box <Activate database>
Group 8
3
4
5
6
7
2
8
9
10
11
12
13
JET3 Series