Figure 47 - Auto. Clock Change (Summer-/Wintertime) - Leibinger JET3 Series Operating Manual

Page 126
Proceeding:
 Press on the tab <Date/Time> (2) to select the tab.
 Now mark in the setting field <Time> (3) the hour-, minute- or second block to
change the values.
 With the two <Arrow keys> (5) you can increase or reduce the values of the blocks
wich are each marked.
 To define the time zone press on the drop-down list <Time zone> (6). The Drop-
down list opens for selection.
 Now select the requested time zone.
4. Automatic clock change:
The function enables you to activate or deactivate the automatic change to summer-
and wintertime (daylight savings time [DST]).
Proceeding:
E.g.: The automatic change to summer- and wintertime should be activated.
 Press on the tab <Date/Time> (2) to select the tab.
 Now activate the automatic clock change by clicking on the check box (3). An
automatic change is displayed by  in the check box.
Figure 47 Automatic clock change (Summer-/Wintertime)
2
3
Release 2.02
Job Editor Group 8
JET3 Series