Printout Options; Figure 131 - Object Settings - Printout Options - Leibinger JET3 Series Operating Manual

Group 8

8.4.5 Printout options

There are several printout options available which can also be combined with each
other. These options affect the look of the printout of the object selected.
The result is displayed in the preview area of the <Global settings> dialog box.
The following options are available:
 invers
 proportional
An option is activated by ticking off the respective checkbox.
Figure 131 Printout options
 Inverse printout: The printing element is printed inverse.
Example:
A printout of letters with black ink on a white substrate.
Without the option <Invers> the letters are printed in black.
With the option <Invers> the area around the letters will be printed in black and the
letters stay white.
 Alternating printout:
Every second printout is mirrored horizontally and vertically.
 Proportional printout:
In standard mode each letter printed has a fixed width. With the <proportional>
option the space between the letters printed is optimized.
JET3 Series
Printout:
Printout: alternating
1. Print 2. Print
Printout:
Job Editor
 alternate
Standard
3. Print
Standard
Page 247
Inverse
etc.
Proportional
Release 2.02