Leibinger JET3 Series Operating Manual page 126

Page 124
Proceeding:
 Press on the tab <Date/Time> (2) to select the tab.
 Press on the arrow key of the Drop-down list <Date format> (3) to define the
format. A drop-down list opens.
 Now select the requested format.
 Press the button <OK> (4) to take over the changes.
 A confirmation prompt (5) pops up. Press the button <No> (6) to abort the
process or press the button <Yes> (7) to save the changes.
 Now the device will will be rebooted automatically.
 After the reboot the device switches into standby-mode (display is dark).
Release 2.02
ATTENTION
For changing the date format you have to shut down the complete
system and initialize it again!
Job Editor Group 8
JET3 Series