Leibinger JET3 Series Operating Manual page 302

Page 300
Extern text object (6)
Pushing the <Extern Text> button (6) will insert a {e} symbol (15) at the current cursor
position within the <Content> display field (2). There will also be displayed an additional
tab on the tab bar of the <Object Settings> dialog box:
Extern text tab (14)
On the <Extern Text> tab the content of the placeholder {e} is configured.
For details about configuring extern text objects please see chapter 8.7.5
Extern Text for details.
FNC1 function (7)
Pushing the <FNC1> button (7) will insert a {f} symbol (16) at the current cursor position
within the <Content> display field (2).The function <FNC1> is a special code used with
GS1 bar codes .The <FNC1> control character identifies data with Application Identifiers
(AI). The <FNC1> control character is followed by an Application Identifier (AI) number
which provides a bar code reader with information about the following data. The
<FNC1> control character represents the ASCII character 207 (dec.).
Example:
Code: [FNC1] 21 12345 [FNC1] 11 090101 17 100101
21: Serial number. The following number is considered as a serial number
10: Lot number data. The following number is considered as a lot number
Field Sep (GS) (8)
Pushing the <Field Sep (GS)> button (8) will insert a {g} symbol (17) at the current
cursor position within the <Content> display field (2).The function <Field Sep (GS)> is a
special code used with PPN bar codes.
The PPN (pharmaceutical product number) specifications require a field separator
between data elements. Actually the field separator represents the ASCII character 29
(dec.).
Release 2.02
Job Editor
INFORMATION
Group 8
JET3 Series