Leibinger JET3 Series Operating Manual page 364

Page 362
For correct handling the LEIBINGER re-filling system allows an odor- and splash free
refilling of the consumables.
The reservoir tanks should be not overfilled, that means a re-filling
should be only carried out if a certain message has been generated
by the printer!
Risk of fire and injury! Absolutely observe!
 Before filling the device with the consumables, measures for the
 Highly flammable! Burning gases and liquids may cause severe
 Always statically discharge the printer and yourself before filling the
 Protective equipment is necessary! Read the safety data sheets and
The sealing of the refill bottle should be not opened!
Release 2.02
Setting-up/Maintenance
ATTENTION
WARNING
electrostatic discharge have to be made!
burns. Keep sources of ignition away from the printer!
reservoirs! Simply touch the housing of the printer to discharge the
equipment and stand on a grounded surface wearing ESD shoes
during filling!
the personal protective equipment rules and regulations!
ATTENTION
Group 10
JET3 Series