Leibinger JET3 Series Operating Manual page 345

Group 8
Object 2:
Wildcards:
Offset:
Sum of wildcards and offset:
Start symbol:
End symbol:
Object 3:
Wildcards:
Offset:
Sum of wildcards and offset:
Start symbol:
End symbol:
The input buffer in this example has the size of 9 characters because the largest sum of
wildcards and offset is 9.
Beside the input buffer there is also a display buffer. The content of the display buffer is
what you see in the print preview of the main window of the Printer printer.
There are the following rules regarding the input and the display buffer:
1. The filling of the input buffer starts with each <Start symbol> received.
2. The filling of the input buffer stops with the first respective <End symbol>
received.
3. If the number of the characters received between <Start symbol> and <End
symbol>exceeds the size of the input buffer all excess characters will be
discarded.
4. If the number of the received characters between <Start symbol> and <End
symbol> is smaller than the size of the input buffer the input buffer will only be
filled with the received characters.
5. With a valid <End symbol> received the current content of the input buffer is
transferred to the display buffer.
6. The print-out always reflects the content of the display buffer (what you see is
what you get printed).
7. The input buffer is emptied as soon as its content is transferred to the display
buffer. The filling starts again with the next <Start symbol> received.
JET3 Series
Job Editor
YYYYY
1
6
G
S
ZZZ
6
9
G
S
Page 343
5 wildcards
1 offset
3 wildcards
6 offset
Release 2.02