Number Of Digits; Start Value; Initialization Value; Figure 169 Counter Settings - Initialization Value - Leibinger JET3 Series Operating Manual
Hide thumbs
Also See for JET3 Series:
- Operating manual (378 pages) ,
- User manual (233 pages) ,
- Service manual (6 pages)
Table of Contents
Advertisement
Group 8
8.7.3.1.1 Number of digits
The setting defines the number of digits of the counter. The maximum input is 10 digits.
The set value is shown on the accordant display field.
8.7.3.1.2 Start value
The setting defines the start value of the counter. The maximum input is 10 digits.
After reaching the end value the counter will be reset to the start value.
The set value is displayed on the accordant display field.
8.7.3.1.3 Initialization value
The setting defines the initialization value of the counter. The maximum input is 10 digits.
That means if the job is started or loaded for the first time, it is first counted from the
initialization value to the end value. Afterwards it is then always counted from the start
value to the end value.
The set value is shown on the accordant display field.
Figure 169
Counter settings - Initialization value
Example:
JET3 Series
Job Editor
Start
value
Page 315
Initialization value
End
value
Release 2.02
Advertisement
Table of Contents
