Lost Password; Password Protection And Password Prompt - Leibinger JET3 Series Operating Manual
Hide thumbs
Also See for JET3 Series:
- Operating manual (378 pages) ,
- User manual (233 pages) ,
- Service manual (6 pages)
Table of Contents
Advertisement
Group 8
7.3.5.2 Lost password
If the password of the highest defined access right (Supervisor) has been lost special
measures are required. In this case please contact the your> LEIBINGER dealer.
Attention
The most critical user privilege in terms of the password and user
management is the <Password active> option on the Factory settings> tab
of the password settings dialog box:
This option has to be checked off at least for 1 user. If you try to uncheck this
option for all users there will pop a warning message and it will not be
possible to uncheck the option:
7.3.6 Password protection and Password prompt
If the password protection of the printer is activated a password prompt pops up with each
start of the printer.
Additionally the <Login> option in the <Extra> drop-down menu is activated and
selectable. Without the password protection activated the option is greyed out.
With this option a user can log in during the operation to e.g. carry out functions which
are not enabled for the currently logged in user.
It does not matter whether a user is logged in at the time the printer is switched off. The
printer will always start in logged out mode and the password prompt will pop up.
If the password function is activated there is a checkmark in front of the <Password
activ> option.
Additionally the current user respectively the last user that has logged out is displayed in
the title bar.
Attention
Do not forget to log out after you have changed the settings of the printer!
Only then the printer is protected against unauthorized use.
JET3 Series
Job Editor
Page 157
Release 2.02
Advertisement
Table of Contents
