Leibinger JET3 Series Operating Manual page 366
Hide thumbs
Also See for JET3 Series:
- Operating manual (378 pages) ,
- User manual (233 pages) ,
- Service manual (6 pages)
Table of Contents
Advertisement
Page 364
When you ignore this message the printer will shut down after the time indicated.
Information
Hints
Ink and solvent numbers shown in the following illustrations are only
examples and may vary depending on the type of printer.
1. Refilling messages for an empty ink and solvent reservoir tank.
Ink
1 – Remaining term until safety shut down in hh:mm:ss
The maximum remaining term for ink is 1 hour and for solvent 3 hours. After this term the
printer shuts down automatically and is put into standby mode. This shall prevent ingress
of air into the hydraulic system caused by the lack of ink or solvent.
Although it is possible to restart the printer from this mode it will be shut down again if no
refill is carried out.
2. Firstly it has to be ensured that only compatible ink or solvent is used for refills. The
ID-number of the ink respective the solvent that can be used for refills are printed on the
respective cap of the reservoir tank and they are also listed in the <Info> dialog box of
the printer on page one.
Marking of reservoir tanks
No. 70000-00101
Example: Marking of the
admissible ink
Release 2.02
Setting-up/Maintenance
1
No. 77001-00030
Example: Marking of the admissible solvent
Solvent
Group 10
JET3 Series
Advertisement
Table of Contents
