Job Editor - File Management; Figure 118 Job Editor - File Management Tools) - Leibinger JET3 Series Operating Manual

Group 8

8.2.2 Job editor - File management

With the button <Job> you can select the organization tools of the job editor.
Figure 118 Job editor - File management tools)
1
1 – <Job> Button
2 – <Save Job>
3 – Open <Save Job as> dialog
Pos. Option
2. Save Job
3. Save Job as
4. Load Job to print
5. Close Editor
JET3 Series
Job Editor
2
3
4
5
4 – <Load Job to print>
5 – <Close Editor>
Function
Saves the current loaded job under the existing
name.
Saves the current loaded job or a new created job
under a new name.
Loads the selected job into the active memory in the
printer. This job will be the next one, which will be
printed
Closes the job editor. If changes weren't saved yet
saved yet, a confirmation prompt pops up.
Page 231
Release 2.02