Intended Use - Leibinger JET3 Series Operating Manual

Page 18

2.3 Intended use

The high performance of the industrial printers of the JET3 Series serves exclusively the
contact-free marking, inscribing and coding of surfaces using the continuous ink jet
process.
The high performance printer can be used on the most varying materials (e.g. metal,
synthetic material, glass, paper, wood, pressed materials, rubber etc.) with both, smooth
as well as uneven, rough and stepped surfaces.
The intended use of this device also includes the observance of all
instructions in this manual.
Using the installation for other purposes is considered contrary to its
intended use!
For safety reasons conversions and alterations are only admissible following
consultation with the manufacturer. Repairs to the device must only be
carried out with original replacement parts.
The manufacturer shall not be liable for damage resulting from use for other
than the intended purpose or misuse.
Danger of explosion!
 The device should be only operated outside of explosive areas!
 The installation has to be carried out according to the installation
 Precautions regarding electrostatics have to be carried out!
Release 2.02
IMPORTANT
WARNING
instructions of the manufacturer!
Safety Group 2
JET3 Series