Remote Sreen; Figure 56 Remote Screen - Password; Figure 57 Remote Screen - Indicator Remote Mode - Leibinger JET3 Series Operating Manual

Group 8

7.3.1.10 Remote sreen

The Printer printer provides a VNC server for remote access. Basically it takes two steps
to use the VNC server of the printer:
1. Assign a password for the VNC server
2. Start the VNC server
This access to the VNC server is password protected. This password is set on the tab
<Remote screen>.
Figure 56 Remote Screen - Password
1
1 – Dialog box <Basic Settings>
2 – Tab <Remote Screen>
A click on the Main window option <Extra> - <Start Remote Screen> will start the VNC
server. The active VNC server is indicated by a status display in the main window.
In order to stop the VNC server click on the Main window option <Extra> - <Close
Remote Screen>.
Figure 57 Remote Screen – Indicator remote mode
1
2
3
1 – Main window
2 – Main window menu item <Extra>
JET3 Series
Job Editor
3 – Input <VNC Password>
3 – Option <Start Remote Screen>
4 – Status display <Remote mode
available>
Page 141
2
3
4
Release 2.02