Basic Settings - Leibinger JET3 User Manual

Group 7

7.3.1 Basic settings

With the option <Basic Settings> (2) the menu „Basic settings" (3) opens.
This menu serves as setting of
Language/Unit (Measurement)
Date/Time
and to reset the device to the factory settings.
The selection of a functional area happens by clicking on the accordant register card
(4).
Note: The proceeding corresponds to the Windows™-standard procedure.
The button <OK> (5) closes the menu.
Figure 33
1 – Button <Settings>
2 – Option <Basic Settings>
3 – Menu <Basic Settings>
Release R1.03e
Data/Programming
1
2
Interval function
Encoder interface
3
4 – Register cards
5 – Button <OK>
Page 74
Factory Settings
IP-address
4
5
Menu basic settings
LEIBINGER JET3