Electrical Characteristics - Renesas M16C/60 Series Hardware Manual

Under development
This document is under development and its contents are subject to change.
M16C/6N5 Group

Electrical Characteristics

Table 1.22.9 lists the flash memory electrical characteristics. Table 1.22.10 lists the flash memory version
program/erase voltage and read operation voltage characteristics.
Table 1.22.9 Flash Memory Electrical Characteristics (Note 1)
Symbol
- Word program time
Block erase time
-
- Erase all unlocked blocks time
Lock bit program time
-
tps Flash memory circuit stabilization wait time
Note 1: Referenced to V
Note 2: n denotes the number of blocks to erase.
Table 1.22.10 Flash Memory Version Program/Erase Voltage and Read Operation Voltage Characteristics
(at T
opr
Flash program, erase voltage
V = 5.0 ± 0.5 V
CC
Rev.1.00 2003.05.30 page 287
Parameter
= 4.5 to 5.5 V, T = 0 to 60 °C unless otherwise specified.
CC opr
= 0 to 60 °C)
Standard
Min.
1 ✕ n (Note 2)
Flash read operation voltage
V = 4.2 to 5.5 V
CC
Flash Memory
Unit
Typ. Max.
µs
30 200
1 4 s
4 ✕ n
s
µs
30 200
µs
15