Overview; Applications - Renesas M16C/60 Series Hardware Manual

Under development
This document is under development and its contents are subject to change.
M16C/6N5 Group

Overview

The M16C/6N5 group of single-chip microcomputers are built using the high-performance silicon gate
CMOS process using an M16C/60 Series CPU core and are packaged in a 100-pin plastic molded QFP.
These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruction
efficiency. With 1 Mbyte of address space, they are capable of executing instructions at high speed.
Being equipped with one CAN (Controller Area Network) module in M16C/6N5 group, the microcomputer is
suited to drive automotive and industrial control systems. The CAN module comply with the 2.0B specification.
In addition, this microcomputer contains a multiplier and DMAC which combined with fast instruction processing
capability, makes it suitable for control of various OA, communication, and industrial equipment which
requires high-speed arithmetic/logic operations.

Applications

Automotive, industrial control systems and other autmobile, other
Rev.1.00 2003.05.30 page 1
Overview