Rep 12.5.5 Size Sensors 1/2 (Rear/Front) - Xerox DocuColor 12/DCCS50 Service Manual

Figure 2 Installing the Registration Sensor
2. Reinstall the remaining parts in the reverse order of disassembly.
Repairs and Adjustments
REP 12.5.4, REP 12.5.5

REP 12.5.5 Size Sensors 1/2 (Rear/Front)

Parts List on PL 12.5
Removal
Turn power off and disconnect the power plug.
1. Remove the Document Feed Lower Chute
2. Remove the Set Gate Solenoid
3. Remove the Size Sensors 1/2 (front/rear)
1. Loosen the screws (2).
2. Remove the screws (2).
3. Remove the bracket.
4. Remove the Size Sensors 1/2.
Figure 1 Remove the Size Sensors 1/2
Installation
1. Reinstall the parts in the reverse order of disassembly.
1/05
4-166
manuals4you.com manuals4you.com
WARNING
(REP 12.5.1).
(REP 12.5.3).
(Figure 1).
DocuColor 12/DCCS50
Reissue