Separation Failure Jam Due To Deformation Of Separation Claw - Canon imageRUNNER ADVANCE 8105 Series Service Manual

2
Technology > Image Formation System > Servicing > Troubleshooting
MEMO:
If the image cannot be adjusted correctly even with this adjustment procedure, reenter
the values written in step 5-1.
2
Technology > Image Formation System > Servicing > Troubleshooting
●

Separation Failure Jam due to Deformation of Separation Claw

[Location]
Drum Separation Claw
[Cause]
When the paper enters to the drum at separation failure, the Separation Claw may be
deformed. When the Separation Claw is deformed, the paper is easily caught by the leading
edge of the Separation Claw when the paper (especially curled paper) is fed, and a jam (Jam
Code: 0205) is likely to occur.
[Condition]
Not Use
Job after a jam which occurs when the paper enters to the drum
When using curled paper (when using backside of printed paper, etc.)
F-2-125 F-2-125
[Field Remedy]
Replace the Separation Claw.
MEMO:
Replace the Separation Claw when a separation failure jam occurs even once..
2-98
F-2-126 F-2-126
2-98