Version Upgrade Using Usb Memory Storage Device - Canon imageRUNNER ADVANCE C2030 Service Manual

Version Upgrade using USB Memory Storage Device

■ Relation between SST and USB memory storage device
When using the USB memory storage device for version upgrade, the system software
should be copied to the USB memory storage device. By inserting the USB memory storage
device to the slot of the machine, the system software can be upgraded.
The figure below shows the relation between SST and USB memory storage device.
PC
SST
System software
Copying the System Software
USB memory
storage device
Downloading the
SST system software
System software
When downloading the system software, enter download mode by any of the following
methods.
• Select the following in service mode (recommended):
COPIER > FUNCTION > SYSTEM > DOWNLOAD; and click [OK].
• Press and hold 2 and 8 keys simultaneously on the numeric keypad when turning ON the
power switch.
NOTE:
It takes 2 to 3 minutes to enter the download mode from the service mode because the
machine is restarted. Do not turn OFF the power during that time.
6
Troubleshooting > Version upgrade > Version Upgrade using USB Memory Storage Device > Relation between SST and USB memory storage device
iR ----
Flash ROM
6 Troubleshooting > Version upgrade > Version Upgrade using USB Memory Storage Device > Relation between SST and USB memory storage device
● Downloading System Software
The system software is updated according to the set of versions selected from the USB
menu. The system software is stored in the temporary storage space on the FLASH PCB
immediately after the system software is downloaded. After the download process, the
system software is written in the system area on the FLASH PCB and the data saved in
the temporary storage space is deleted.This machine is automatically restarted when the
writing process is completed. When writing process is successfully completed, the machine is
restarted with the new version of the system software. When an error occurs, the machine is
restarted with the previous version of the system software.
Tasks in the customer site
Task in the office
USB memory
storage device
System
Software
Copying the system software
システムソフトウェアのコピー
2)
The system software is written
3)
<<<<< download shell >>>>>
[ SYSTEM JPja-m ] - - - -
Upgrading complete
[ SYSTEM ZZ ] - - - - - - - Upgrading complete
[ SYSTEM JPja-w ] - - - - Upgrading complete
[ SYSTEM ZZ ] - - - - - - - Upgrading complete
[ FONT F ] - - - - - - - - - - Upgrading complete
[ FONT G ] - - - - - - - - - - Upgrading complete
+++ Switch OFF the power then ON. +++
FLASH
Temporary
memory space
System
memory area
System
Software
Download the system software
1)
- - - Download Mode - - -
[ iR2270i-JPjaxxxx-MN.dsh ] - - - - - - - - - - Complete
[ iR2270iM-JPjaxxxx-1F77-MN.PRG ] - - - - Complete
[ iR2270iM-ZZjaxxxx-49AD.PRG ] - - - - - - - Complete
[ iR2270iW-JPjaxxxx-5C16-MN.PRG ] - - - - Complete
[ iR2270iW-ZZjaxxxx-A825.PRG ] - - - - - - -
Complete
[ iR2270iF-JPjaxxxx-DE96-ICC.PRG ] - - - - Complete
[ iR2270iW-ZZjaxxxx-A825.PRG ] - - - - - - - Complete
[ iR2270iG-JPjaxxxx-EC30-ICC.PRG ] - - - - Complete
FLASH
Temporary
memory space
System
Software
System
Software
System
memory area
Automatically restarted
4) Automatically restarted
主電源スイッチOFF/ON
5) Start with the new version.
6-40
6-40