Version Upgrade Using Usb Memory Storage Device; Relation Between Sst And Usb Memory Storage Device - Canon imageRUNNER ADVANCE C350 series Service Manual

● Firmware to be exported to USB memory
When the firmware of the selected optional language in "Optional Language Setting" is
installed to SST, it is exported to the USB memory.
The firmware of the other optional languages are not exported to the USB memory.
When Danish and Dutch are selected in the "Optional Language Setting", the firmware of
these languages are exported to the USB memory as shown below.
6
Troubleshooting > Version Upgrade > Version Upgrade using USB Memory Storage Device > Relation between SST and USB memory storage device
F-6-45
6 Troubleshooting > Version Upgrade > Version Upgrade using USB Memory Storage Device > Relation between SST and USB memory storage device

Version Upgrade using USB Memory Storage Device

■ Relation between SST and USB memory storage device

When using the USB memory storage device for version upgrade, the system software
should be copied to the USB memory storage device. By inserting the USB memory storage
device to the slot of the machine, the system software can be upgraded.
The figure below shows the relation between SST and USB memory storage device.
PC
SST
System software
Copying the System Software
USB memory
storage device
Downloading the
SST system software
System software
When downloading the system software, enter download mode by any of the following
methods.
• Select the following in service mode (recommended):
COPIER > FUNCTION > SYSTEM > DOWNLOAD; and click [OK].
• Press and hold 2 and 8 keys simultaneously on the numeric keypad when turning ON the
power switch.
NOTE:
It takes 2 to 3 minutes to enter the download mode from the service mode because the
machine is restarted. Do not turn OFF the power during that time.
6-33
iR ----
Flash ROM
F-6-46
6-33