Voltage Objects; Parameter 16-30: Dc Link Voltage (0X2003); Parameter 50-06: Auxiliary Voltage (0X200E); Parameter 16-19, 16-31, 16-34, 16-39: Temperature (0X2000) - Danfoss VLT Series Programming Manual

Servo Drive Parameter Descr...

7.22.15 Voltage Objects

7.22.15.1 Parameter 16-30: DC Link Voltage (0x2003)

This value provides the measured DC-link voltage. The value is given in Volt.
Attribute
Index
LCP parameter number
Name
Object code
Data type
Sub-index
Access
PDO mapping
Value range
7 7
Default value
Table 7.264 0x2003: DC Link Voltage

7.22.15.2 Parameter 50-06: Auxiliary Voltage (0x200E)

This object provides the voltage of U
Attribute
Index
LCP parameter number
Name
Object code
Data type
Sub-index
Access
PDO mapping
Value range
Default value
Table 7.265 0x200E: Auxiliary Voltage

7.22.16 Parameter 16-19, 16-31, 16-34, 16-39: Temperature (0x2000)

This object contains several internal temperatures of the device. All the values are given in °C.
Sub-index 1 contains the temperature of the module.
Sub-index 2 contains the temperature from the internal sensor 1.
Sub-index 3 contains the temperature from the internal sensor 2.
Sub-index 4 contains the temperature of the motor winding.
Attribute
Index
Name
Object code
Sub-index
Description
356
®
VLT Integrated Servo Drive ISD
Value
0x2003
16-30
DC link voltage
Var
INTEGER16
0x00
Read only
Optional
–
–
. The value is given in Volt.
AUX
Value
0x200E
50-06
Auxiliary voltage
Var
FLOAT
0x00
Read only
Optional
–
–
Value
0x2000
Temperature
Array
0x00
Value of highest sub-index
Danfoss A/S © 01/2017 All rights reserved.
®
510 System
MG36D102