Danfoss VLT Series Programming Manual page 14

Contents
7.19 Tracing Objects
7.20 Option Code Objects
7.21 Peripherals
7.22 Monitoring Objects
12
®
VLT Integrated Servo Drive ISD
7.18.7 Parameters 51-50 and 51-60: Touch Probe Source (0x60D0)
7.18.8 Parameter: First Position (0x3853)
7.18.9 Parameter: Last Position (0x3854)
7.18.10 Parameter 51-53: Touch Probe Time Stamp 1 Positive Value (0x60D1)
7.18.11 Parameter 51-56: Touch Probe Time Stamp 1 Negative Value (0x60D2)
7.18.12 Parameter 51-63: Touch Probe Time Stamp 2 Positive Value (0x60D3)
7.18.13 Parameter 51-66: Touch Probe Time Stamp 2 Negative Value (0x60D4)
7.18.14 Parameter 51-52: Touch Probe 1 Positive Edge Counter (0x60D5)
7.18.15 Parameter 51-55: Touch Probe 1 Negative Edge Counter (0x60D6)
7.18.16 Parameter 51-62: Touch Probe 2 Positive Edge Counter (0x60D7)
7.18.17 Parameter 51-65: Touch Probe 2 Negative Edge Counter (0x60D8)
7.19.1 Parameter: Signal Tracer Control (0x5000)
7.19.2 Parameter: Signal Trace Channel IDs (0x5001)
7.19.3 Parameter: Trace Data (0x5002)
7.19.4 Parameter: Trace Signal Info (0x5004)
7.20.1 Parameter 50-41: Fault Reaction Option Code (0x605E)
7.20.2 Parameter 50-42: Target Reached Option Code (0x2054)
7.20.3 Parameter 50-43: Following Error Option Code (0x2055)
7.20.4 Parameter 50-44: Enable in Positioning Option Code (0x2052)
7.20.5 Parameter 50-45: Abort Connection Option Code (0x6007)
7.20.6 Parameter 50-46: Quick Stop Option Code (0x605A)
7.20.7 Parameter 50-47: Halt Option Code (0x605D)
7.20.8 Parameter 50-48: Shutdown Option Code (0x605B)
7.20.9 Parameter 50-49: Disable Operation Option Code (0x605C)
7.21.1 Parameter 16-60: Digital Inputs (0x60FD)
7.21.2 Parameters 16-62 and 16-64: Analog Inputs (0x200D)
7.21.3 Parameter: Dual Analog User Inputs Configuration (0x200F)
7.21.4 Parameter 16-66: Digital Outputs (0x60FE)
7.21.5 Parameter 52-05: Digital Output Configuration (0x2FFF)
7.21.6 External Encoder Objects
7.21.6.1 Parameters 51-30 and 51-34 to 51-40: External Encoder Configuration
(0x3000)
7.21.6.2 Parameter 51-32 and 51-33: External Encoder (0x2011)
7.21.6.3 Parameter 51-31: External Encoder Enable (0x3001)
7.22.1 Following Error Detection Objects
7.22.1.1 Parameter: Following Error Window (0x6065)
Danfoss A/S © 01/2017 All rights reserved.
®
510 System
322
322
323
324
324
324
325
325
326
326
327
327
327
329
330
330
331
331
331
332
333
333
334
334
335
335
336
336
337
337
338
339
340
340
342
343
343
343
343
MG36D102