Huawei Quidway S8500 Series Command Manual page 294

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches
View
Any view
Parameter
inactive: With the parameter, this command displays the inactive route information.
Without the parameter, this command displays the active and inactive route
information.
verbose: With the verbose keyword, this command displays the verbose route
information. Without the parameter, this command displays the route summary.
protocol: The parameter has multiple selectable values:
direct: Displays direct connection route information
static: Displays the static route information.
bgp: Displays BGP route information.
isis: Displays IS-IS route information.
ospf: Displays OSPF route information.
ospf-ase: Displays OSPF ASE route information.
ospf-nssa: Displays OSPF NSSA route information.
rip: Displays RIP route information.
vpn-instance-name: Indicates a VPN instance name.
Description
Use the display ip routing-table protocol command to view the route information of
specified protocol.
Example
# Display all direct connection routes summary.
<Quidway> display ip routing-table protocol direct
DIRECT Routing tables:
Summary count: 4
DIRECT Routing tables status:<active>:
Summary count: 3
Destination/Mask
20.1.1.1/32
127.0.0.0/8
127.0.0.1/32
DIRECT Routing tables status:<inactive>:
Summary count: 1
Destination/Mask
210.0.0.1/32
# View the static routing table.
Chapter 1 Static Route Configuration Commands
Protocol Pre Cost
DIRECT 0
DIRECT 0
DIRECT 0
Protocol Pre
DIRECT 0
Huawei Technologies Proprietary
1-11
Nexthop
0 127.0.0.1
0 127.0.0.1
0 127.0.0.1
Cost Nexthop
0 127.0.0.1
Interface
InLoopBack0
InLoopBack0
InLoopBack0
Interface
InLoopBack0