Toyota Tundra 2005 Service - Repair - Maintenance page 1567

EM−4
RH Bank
Timing Marks
LH Bank
Timing Marks
ENGINE MECHANICAL (1GR−FE)
A22800
Timing Marks
A22801
− VALVE CLEARANCE
VALVE CLEARANCE
INSPECTION
1. DRAIN ENGINE COOLANT (See page CO−2)
2. REMOVE V−BANK COVER
3. REMOVE AIR CLEANER (See page EM−62)
4. REMOVE INTAKE AIR SURGE TANK
(See page EM−62)
5. REMOVE IGNITION COIL
6. REMOVE CYLINDER HEAD COVER
(See page EM−62)
7. SET NO. 1 CYLINDER TO TDC/COMPRESSION
(a) Turn the crankshaft pulley, and align its groove with the
timing mark "0" of the timing chain cover.
(b) Check that the timing marks of the camshaft timing gears
are aligned with the timing marks of the bearing caps as
shown in the illustration.
If not, turn the crankshaft 1 complete revolution (360 _) and
align the timing marks as above.
EM1XG−01