Cmc-Ec01 -- Communication Card, Ethercat - Delta C2000 Series User Manual

Chapter 8 Option CardsC2000
8-15 CMC-EC01 -- Communication card, EtherCAT
8-15-1 Features
The EtherCAT of C2000 currently provides standard control mode of CiA402 Velocity (Index
6060=2), but it is non-synchronous control mode. There is no need to turn on the DC (Distribute
Clock) function when operating. However, if the DC function is required for using with synchronous
products (e.g. ASDA-A2), the CMC-EC01 can still be used normally under this circumstances. The
VFD-C2000 supports the EtherCAT function with firmware version 2.02 and above. Please be
attention to the firmware you use.
8-15-2 Product Profile
8-15-3 Specifications
Network Interface
Interface
Number of ports
Transmission method
Transmission cable
Transmission speed
Network protocol
Electrical Specification
Power supply voltage
Power consumption
Insulation voltage
Weight (g)
RJ-45
2 Port
IEEE802.3, IEEE802.3u
Category 5e shielding 100 M
10 / 100 Mbps Auto-Defect
EtherCAT
5V
DC
0.8W
500V
DC
27
8-38
[Figure 1]
1. Screw fixing hole
2. Positioning hole
3. RUN indicator
4. ERR indicator
5. POWER indicator
6. OUT LINK indicator
7. IN LINK indicator
8. Fool-proof groove
9. RJ-45 connection port
10. RJ-45 connection port
11. Control board connection port