Delta C2000 Series User Manual page 443

Vector control drive

Hide thumbs Also See for C2000 Series:

Table of Contents

Chapter 12 Description of Parameter SettingsC2000

Fan warning detection

Example: Crane Application

It is recommended to be used with Dwell function as shown in the following:

 For crane application, when the MO is set to 42, the setting of Pr. 02-34 must be greater than Pr.

02-58; Pr. 02-33 must be greater than Pr. 02-57.

 To directly control drive's AO/DO and read current AI/DI status via the standard MODBUS, by

adding the Remote IO function, the corresponding index of 26xx is as following:

In addition, the AI and DI value can be read directly, while DO and AO must select MODBUS

control under the corresponding parameter function. The related parameter definition is as

Pr.03-45: The high level for the analog input, default is 50%.

Pr.03-46: The low level for the analog input, default is 10%.

If analog input > Pr.03-45, the multi-function output terminal

operates. If analog input < 03-46, the multi-function output

terminal stops output.

The terminal works when the internal fan warning activates

Descriptions

Show Quick Links

Table of Contents