Chapter 12 Description of Parameter SettingsC2000
Settings
Functions
28
Emergency stop (EF1)
Signal confirmation for
29
Y-connection
Signal confirmation for
30
-connection
High torque bias
31
32
Middle torque bias
33
Low torque bias
Switch between
34
multi-step position and
multi-step speed control
ON: the output of the drive stops immediately, displays "EF1" on
the keypad, and the motor is in free run status. The drive keeps
running until the fault is cleared after you press RESET on the
keypad (EF: External Fault).
When the control mode is V/F, ON: the drive operates by the first
V/F.
When the control mode is V/F, ON: the drive operates by the
second V/F.
Refer to Pr. 11-30~Pr. 11-32 for details.
ON: the corresponding 15-step speed for the multi-function
–
inputs 1
4 are 15 positions. Refer to Pr.04-16
12.1-02-6
Descriptions
–
Pr.04-44.