Delta C2000 Series User Manual page 668

ID No. Display on LCM Keypad
93
Action level
Action time
Warning setting parameter
Reset method
Reset condition
Record
Cause
Non-C2000 PLC program is copied
to C2000
ID No. Display on LCM Keypad
94
Action level
Action time
Warning setting parameter
Reset method
Reset condition
Record
Cause
The PLC copied to C2000 exceeds
the allowable capacity
ID No. Display on LCM Keypad
95
Action level
Action time
Warning setting parameter
Reset method
Reset condition
Record
Cause
PLC function is enabled when
KPC-CC01 is running copy PLC
Warning Name
Copy PLC version error.
Copy PLC: version
When non-C2000 built-in PLC is copied to C2000 drive,
error (CPLv)
the CPLv warning shows
Action and Reset
Software detection
Immediately acts
N/A
Manual reset
Directly resets
N/A
Check if the copied PLC program is for C2000.
Use the correct C2000 PLC program.
Warning Name
Copy PLC: size error
Copy PLC Capacity size error
(CPLS)
Action and Reset
Software detection
Immediately acts
N/A
Manual reset
Directly resets
N/A
Check if the copied PLC program is for C2000
Use C2000 PLC program with correct capacity
Warning Name
Copy PLC: PLC KPC-CC01 Copy PLC function should be executed
function (CPLF) when PLC is off
Action and Reset
Software detection
Immediately acts
N/A
Manual reset
Directly resets
N/A
Disable PLC function first, then run the PLC copy function again
13-41
Chapter 13 Warning CodesC2000
Description
Corrective Actions
Description
Corrective Actions
Description
Corrective Actions