Delta C2000 Series User Manual page 220

『 MKC-CFM 』 Installation
1. Install accessory 1& 2 by fastening 4 of the screw 1(M8). Screw torque: 50~55 kg-cm / [43.4~47.7 Ib-in.] /
[4.9~5.4 Nm] (As shown in the following figure)
2. Plate installation, place 8 of the screw 2 (M6) through Accessory 1 & 2 and the plate then fasten the screws.
Screw torque: 25~30 kg-cm / [21.7~26 Ib-in.] / [2.5~2.9 Nm] (As shown in the following figure)
Chapter 7 Optional AccessoriesC2000
7-113