Multi-Stage Speed Parameters - Delta C2000 Series User Manual

Chapter 12 Description of Parameter SettingsC2000
04 Multi-step Speed Parameters
1st Step Speed Frequency

2nd Step Speed Frequency

3rd Step Speed Frequency

4th Step Speed Frequency

5th Step Speed Frequency

6th Step Speed Frequency

7th Step Speed Frequency

8th Step Speed Frequency

9th Step Speed Frequency

10th Step Speed Frequency

11th Step Speed Frequency

12th Step Speed Frequency

13th Step Speed Frequency

14th Step Speed Frequency

15th Step Speed Frequency

Settings
 Use the multi-function input terminals (refer to settings 1–4 of Pr. 02-01–02-08 and Pr.
02-26–02-31 Multi-function Input Command) to select the multi-step speed command (the
maximum is 15
in the following diagram.
 The external terminal/digital keypad/communication controls the RUN and STOP commands with
Pr.00-21.
 You can set each multi-step speed between 0.00–599.00 Hz during operation.
 Explanation for the timing diagram of the multi-step speed and external terminals
The related parameter settings are:
1. Pr. 04-00–04-14: sets the 1
2. Pr. 02-01–02-08 and Pr. 02-26–02-31: sets the multi-function input terminals (multi-step speed
command 1–4)
 Related parameters:
Pr. 01-22 JOG Frequency

Pr. 02-01 Multi-function Input Command 1 (MI1)

Pr. 02-02 Multi-function Input Command 2 (MI2)

Pr. 02-03 Multi-function Input Command 3 (MI3)

Pr. 02-04 Multi-function Input Command 4 (MI4)

0.00–599.00 Hz
step speed). Pr. 04-00 to Pr. 04-14 set the multi-step speed frequency as shown
th
to 15
st th
 This parameter can be set during operation.
multi-step speed (to set the frequency of each step speed)
12.1-04-1
Default: 0.00