Delta C2000 Series User Manual page 436

 The default for bit 0 (MI1) is FWD terminal, and the default for bit 1 (MI2) is REV terminal. You
cannot use this parameter to change the input mode when Pr.02-00 ≠ 0.
 You can change the terminal ON / OFF status through communications.
For example: MI1 is set to 1 (multi-step speed command 1) and MI2 is set to 2 (multi-step speed
command 2). Then the forward + second step speed command = 1001
As long as Pr.02-12 = 9 is set through communications, there is no need to wire any
multi-function terminal to run forward with the second step speed.
bit15 bit14 bit13 bit12 bit11 bit10 bit9 bit8 bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
MI14 MI13 MI12 MI11 MI10 MI9 MI8 MI7 MI6 MI5 MI4 MI3 MI2 MI1
 Use Pr.11-42 bit 1 to select whether the FWD / REV terminal is controlled by Pr.02-12 bit 0 and
bit 1.
Multi-function Output 1 (Relay1)

Multi-function Output 2 (Relay2)

Multi-function Output 3 (MO1)

Multi-function Output 4 (MO2)

Output terminal of I/O extension card (MO10) or (RA10)

Output terminal of I/O extension card (MO11) or (RA11)

Output terminal of I/O extension card (RA12)

Output terminal of I/O extension card (RA13)

Output terminal of I/O extension card (RA14)

Output terminal of I/O extension card (RA15)

Output terminal of I/O extension card (MO16 virtual terminal)

Output terminal of I/O extension card (MO17 virtual terminal)

Output terminal of I/O extension card (MO18 virtual terminal)

Output terminal of I/O extension card (MO19 virtual terminal)

Output terminal of I/O extension card (MO20 virtual terminal)

Settings
0: No function
1: Indication during RUN
2: Operation speed reached
3: Desired frequency reached 1 (Pr. 02-22)
4: Desired frequency reached 2 (Pr. 02-24)
5: Zero speed (Frequency command)
6: zero speed including STOP (Frequency command)
7: Over-torque 1 (Pr. 06-06–06-08)
8: Over-torque 2 (Pr. 06-09–06-11)
9: Drive is ready
Chapter 12 Description of Parameter SettingsC2000
12.1-02-11
= 9 .
2 10
Default: 11
Default: 1
Default: 66
Default: 0