Delta C2000 Series User Manual page 273

Chapter 8 Option CardsC2000
LED
ERROR
IN LINK
OUT LINK
8-15-7 Network Connection
Because the packet delivery of EtherCAT has directional characteristics, the connection must be
correct. The designed delivery direction of CMC-EC01 is left for IN / right for ON, the correct wiring
is as below shown:
When the hardware is installed and power on, check for the display. The current set value of
Pr.09-60 will be 6, and shows "EtherCAT" on the display. If the above information does not show
on the display, please check the version of VFD-C2000 (V2.02 and above) and the connection of
the card.
Status
Flashed
Red
Off
On
Green Flashes
Off
On
Green Flashes
Off
Indication
Basic configuration error (On / Off 200ms)
Status switching error
(On 200ms / Off 1000ms)
Times out (On 200ms twice / Off 1000ms)
No error
Network connection in normal status
Network in operation
Network not connected
Network connection in normal status
Network in operation
Network not connected
8-40