Zero Phase Reactor - Delta C2000 Series User Manual

Vector control drive

Hide thumbs Also See for C2000 Series:

Table of Contents

Chapter 7 Optional AccessoriesC2000

Note 1: The table above gives approximate wire size for the zero phase reactors but the selection is ultimately

governed by the type and diameter of cable fitted, i.e. the cable must fit through the center hole of zero phase

Note 2: Only the phase conductors should pass through, not the earth core or screen.

Note 3: For the zero phase reactor used for signal cables, it is recommended to install near to the driver and well

fixed, as to prevent vibration and pulling of the cable.

Recommended wire

T60006L2050W565

T60006L2040W453

T60004L2025W622

T60004L2016W620

Note 1: *The table above is for reference only, please choose the zero phase reactor based on the actual

wire size that you are using.

Note 2: Some of the cables are recommended to choose bigger zero phase reactor due to its corresponded

mechanical size.

Recommended max. motor wire size of zero phase reactor (included LUG width and temp. tolerance of motor cable)