Delta C2000 Series User Manual page 444

DO
Terminal
RY1
RY2
MO1
MO2
MO10
MO11
MO12
MO13
MO14
MO15
AO
Terminal
AFM1
AFM2
AFM10
AFM11
Multi-function Output Setting

Settings 0000h~FFFFh (0: N.O. ; 1:N.C.)
 This parameter is in hexadecimal.
 This parameter is set by a bit. If a bit is 1, the corresponding multi-function output acts in an
opposite way.
Example:
If Pr. 02-13=1 and Pr. 02-18=0, Relay 1 is ON when the drive runs and is open when the drive is
stopped.
If Pr. 02-13=1 and Pr. 02-18=1, Relay 1 is open when the drive runs and is closed when the drive
is stopped.
bit setting
bit15 bit14 bit13 bit12 bit11 bit10
MO20 MO19 MO18 MO17 MO16 MO15 MO14 MO13 MO12 MO11 MO10 MO2 MO1 Reserved RY2 RY1
Terminal Counting Value Reached (returns to 0)

Settings 0~65500
 The counter trigger can be set by the multi-function terminal MI6 (set Pr. 02-06 to 23). Upon
completion of counting, the specified multi-function output terminal will be activated (Pr. 02-13, Pr.
02-14, Pr. 02-36, Pr. 02-37 is set to 18). Pr. 02-19 cannot be set to 0.
 When the display shows c5555, the drive has counted 5,555 times. If display shows c5555, it
means that real counter value is between 55,550 to 55,559.
Pr. Setting
Pr. 02-13 = 51
Pr. 02-14 = 51
Pr. 02-16 = 51
Pr. 02-17 = 51
Pr. 02-36 = 51
Pr. 02-37 = 51
Pr. 02-38 = 51
Pr. 02-39 = 51
Pr. 02-40 = 51
Pr. 02-41 = 51
Pr. Setting
Pr. 03-20=21
Pr. 03-23=21
Pr. 14-12=21
Pr. 14-13=21
bit9
12.1-02-19
Chapter 12 Description of Parameter SettingsC2000
Indexes of MODBUS direct control
The bit0 of 2640h
The bit1 of 2640h
The bit3 of 2640h
The bit4 of 2640h
The bit5 of 2640h
The bit6 of 2640h
The bit7 of 2640h
The bit8 of 2640h
The bit9 of 2640h
The bit10 of 2640h
Indexes of MODBUS direct control
The value of 26A0h
The value of 26A1h
The value of 26AAh
The value of 26ABh
bit8 bit7 bit6 bit5
Default Setting: 0000h
bit4 bit3 bit2 bit1 bit0
Default Setting: 0