Delta C2000 Series User Manual page 366

Pr. Parameter Name
Acceleration / deceleration time
06-05 selection for stall prevention at

constant speed
Over-torque detection selection
06-06

(OT1)
06-07 Over-torque detection level (OT1)

06-08 Over-torque detection time (OT1)

Over-torque detection selection
06-09

(OT2)
06-10 Over-torque detection level (OT2)

06-11 Over-torque detection time (OT2)

 06-12 Current limit
Electronic thermal relay selection
06-13

1 (Motor 1)
Electronic thermal relay action
06-14

time 1 (Motor 1)
Temperature level over-heat (OH)
06-15

warning
Stall prevention limit level
06-16 (Weak magnetic area current stall

prevention level)
Chapter 11 Summary of Parameter SettingsC2000
Setting Range
0: By current acceleration / deceleration time
1: By the 1 st acceleration / deceleration time
2: By the 2 acceleration / deceleration time
nd
3: By the 3 rd acceleration / deceleration time
4: By the 4 acceleration / deceleration time
th
5: By automatic acceleration / deceleration
0: No function
1: Continue operation after over-torque detection
during constant speed operation
2: Stop after over-torque detection during constant
speed operation
3: Continue operation after over-torque detection
during RUN
4: Stop after over-torque detection during RUN
10–250% (100% corresponds to the rated current of
the drive)
0.0–60.0 sec.
0: No function
1: Continue operation after over-torque detection
during constant speed operation
2: Stop after over-torque detection during constant
speed operation
3: Continue operation after over-torque detection
during RUN
4: Stop after Over-torque detection during RUN
10–250% (100% corresponds to the rated current of
the drive)
0.0–60.0 sec.
0–250% (100% corresponds to the rated current of
the drive)
0: Inverter motor (with external forced cooling)
1: Standard motor (motor with fan on the shaft)
2: Disable
30.0–600.0 sec.
0.0–110.0°C
0–100% (Pr. 06-03, Pr. 06-04)
11-31
Default
0
0
120
0.1
0
120
0.1
170
2
60.0
105.0
100