Delta C2000 Series User Manual page 213

Chapter 7 Optional AccessoriesC2000
『 MKC-AFM1 』 Installation
1. Install accessory 1 by fastening 4 of the screw 1 (M3) (figure 1). Screw torque: 6~8 kg-cm / [5.21~6.94 Ib-in.] /
[0.6~0.8 Nm]
2. Install accessory 2&3 by fastening 2 of the screw 2 (M6) (figure 2). Screw torque: 25~30 kg-cm /
[21.7~26 Ib-in.] / [2.5~2.9 Nm]
3. Install accessory 2 & 3 by fastening 2 of the screw 2 (M6) (figure 3). Screw torque: 25~30 kg-cm / [21.7~26
Ib-in.] / [2.5~2.9 Nm]
4. Plate installation, place 4 of the screw 2 (M6) (figure 4) through accessory 2 & 3 and the plate then fasten the
screws. Screw torque: 25~30 kg-cm / [21.7~26 Ib-in.] / [2.5~2.9 Nm]
Figure 1
Figure 2
Figure 3
Figure 4
7-106