Delta C2000 Series User Manual page 432

Settings Functions
Enable single-point
35
position control
Enable multi-step
36 position learning function
(valid at stop)
Chapter 12 Description of Parameter SettingsC2000
ON: the AC motor drive executes internal single-point position
control according to the setting for Pr.10-19. This function is
valid in FOCPG mode only.
ON/OFF: the drive uses the multi-function inputs 1
status to find the corresponding multi-step positions and writes
the current motor position into the corresponding multi-step
position.
12.1-02-7
Descriptions
–
4 ON/OFF