Delta C2000 Series User Manual page 396

 The setting value 16 is ON / OFF status of digital input according to Pr. 02-12 setting, and the setting
value 19 is the corresponding CPU pin ON / OFF status of the digital input.
 The FWD / REV action and MI1 (which is set as three-wire) are not affected by Pr. 02-12.
 You can set 16 to monitor the digital input status, and then set 19 to check if the circuit is normal.
 Explanation 4
Assume that RY1: Pr. 02-13 is set to 9 (Drive is ready). After the AC motor drive powers on, if there
is no other abnormal status, the contact is ON. The display status is shown below.
Normally opened contact (N.O.)
Terminal MO20 MO19 MO18 MO17 MO16 MO15 MO14 MO13 MO12 MO11 MO10 MO2 MO1 Reserved RY2 RY1
Status 0
 If Pr. 00-04 is set to 17 or 20, it displays in hexadecimal "0001h" with LED u page is ON in the
keypad.
 The setting value 17 is ON / OFF status of digital output according to Pr. 02-18 setting, and the
setting value 19 is the corresponding CPU pin ON / OFF status of the digital output.
 You can set 17 to monitor the digital output status, and then set 20 to check if the circuit is normal.
 Explanation 5
Setting value 8: 100% means the motor rated torque.
Motor rated torque = (Motor rated power x 60 / 2π) / Motor rated rotating speed
 Explanation 6
Setting value 25: when displayed value reaches 100.00%, the drive shows "oL" as an overload
warning.
 Explanation 7
Setting value 38
bit0: The drive is running forward.
bit1: The drive is running backward.
bit2: The drive is ready.
bit3: Errors occurred on the drive.
bit4: The drive is running.
bit5: Warnings occurred on the drive.
Coefficient Gain in Actual Output Frequency

Settings 0.00–160.00
 This parameter is to set coefficient gain in actual output frequency. Set Pr. 00-04= 31 to display
the calculation result on the screen (calculation = output frequency * Pr. 00-05).
Software Version
Settings Read only
0 0 0 0
Chapter 12 Description of Parameter SettingsC2000
0 0 0 0
12.1-00-5
0 0 0 0
Default: 0
Default: Read only
0 0 1