DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Do you want to update the enable password for privilege level 15? (y/n) [n]y
Please input privilege level 15 enable password:
Do you want to disable AAA function to let the system do the local authentication?
(y/n) [n] y
Switch(reset-config)#
2-12 show environment
This command is used to display fan, temperature, power availability and status information.
show environment [fan | power | temperature]
Parameters
fan
power
temperature
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If a specific type is not specified, all types of environment information will be displayed.
Example
This example shows how to display fan, temperature, power availability and status information.
Switch#show environment
Detail Temperature Status:
Unit
Temperature Descr/ID
-----
------------------------------------------------------
1
Central Temperature/1
Status code: * temperature is out of threshold range
Detail Fan Status:
--------------------------------------------------------------
Fan 1 (OK)
Detail Power Status:
Unit
Power Module
-----
----------------
1
Power 1
1
Power 2
(Optional) Specifies to display the switch fan detailed status.
(Optional) Specifies to display the switch power detailed status.
(Optional) Specifies to display the switch temperature detailed status.
Fan 2 (OK)
Fan 3 (OK)
Power Status
-------------
in-operation
empty
19
Current/Threshold Range
24C/0~45C