D-Link DXS-3600 Series Cli Reference Manual page 74

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
no prompt
Parameters
STRING
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use the prompt command to customize the CLI prompt. If the user selects to encode the SNMP server
name as the prompt, only the first 15 characters are encoded. The privileged level character will appear
as the last character of the prompt.
The character is defined as follows.
•
'>' Represents user level.
•
'#' Represents privileged user level.
Example
This example shows how to change the prompt to "BRANCH A" using administrator.
Switch# configure terminal
Switch(config)# prompt BRANCH%sA
BRANCH A(config)#
5-4 enable password
This command is used to setup enable password to enter different privileged levels and use the no to
return the password to the empty string.
enable password [level PRIVILEGE-LEVEL] [0| 7] PASSWORD
no enable password [level PRIVILEGE-LEVEL]
Parameters
level PRIVILEGE-LEVEL
0 PASSWORD
Specifies a string to define the customized prompt. The prompt will be
based on the specified characters or the following control characters.
The space character in the string is ignored.
% h – encode the SNMP server name.
%s – space
%% - encode the % symbol
Specifies the privilege level for the user. The privilege level is between
1 and 15. If this argument is not specified in the command or the no
form of the command, the privilege level defaults to 15 (traditional
enable privileges).
Specifies the password the user must enter to gain access to the
69