Firmware Update; Product Upgrade Using Fully Accessible System Topology (Fast) - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710/L Broadcast Satellite Modem
Introduction
balance. When normal operation is again selected, all previous operating
parameters and values are restored.

1.1.2.2 Firmware Update

Chapter 5. FIRMWARE UPDATE
It is important that you operate the CDM-710/L with its latest available operating
firmware. You may update the firmware without opening the unit by connecting
the unit to the Ethernet port of a Windows-based user PC. Firmware updates are
available for download via the Internet from Comtech EF Data's web site
(www.comtechefdata.com). You may also acquire updates through e-mail by
request from Comtech EF Data Product Support.
1.1.2.3 Product Upgrade Using Fully Accessible System Topology
(FAST)
Chapter 6. FAST ACTIVATION PROCEDURE
The CDM-710/L offers a number of optional features. To permit a lower initial
cost, you may purchase the unit with only the desired features enabled. If you
wish to upgrade the functionality of your unit at a later date, Comtech EF Data
provides FAST – Fully Accessible System Topology.
FAST permits the purchase and activation of options through special authorization
codes. You may load these Fast Access Codes into the unit locally using the front
panel keypad, or remotely via the serial remote interface located on the modem
rear panel.
You may purchase these unique access codes during normal business hours from
Comtech EF Data Product Support.
1–4
MN/CDM710.IOM
Revision 12