Vipersat Configuration Page - Comtech EF Data CDM-570 Installation And Operation Manual

CDM-570/570L Satellite Modem with Optional IP Module
IP Module CLI and Telnet Operation
17.2.6

Vipersat Configuration Page

The Vipersat Configuration page is activated from the Main Menu page.
The Vipersat Configuration page contains the following options/fields:
Menu Options/Fields
STDMA Mode
Automatic Switching
Unit Role
Expansion Unit
Bandwidth Group ID
Unit Name
Multicast Management IP Address
Multicast VMS Management IP
Address
Managing IP Address
Path Loss Data Multicast (PLDM)
Dynamic Power Config
Set Home State Parameters
Save Parameters
Exit
Entry Description
T
A
R
E
B
N Only used when CDM-570/570L is used in a Vipersat
system. Refer to Vipersat Operators Manual for more
M
information.
V
I
P
C
H
S This option allows a user to save the current configuration to
permanent storage. This configuration will be restored on
each successive power cycle.
X This option allows a user to exit the current menu and return
to its parent menu.
17–43
Revision 3
MN/CDM570L.IOM