Table of Contents
Advertisement
CDM-625 Advanced Satellite Modem
Ethernet-based Remote Product Management
6.5.4.2.3
Admin | Firmware Pages
Chapter 4. UPDATING FIRMWARE
Click the Base Modem tab, or when the optional IP Packet Processor card is installed, the Packet
Processor tab to continue.
6.5.4.2.3.1 Admin | Firmware | Base Modem
Use this page to view the scrollable, read-only status windows that provide information about
the basic unit's two loaded and operational firmware images.
Boot
This window identifies the firmware number, version, and release date that is loaded upon
power-up/boot up of the unit.
Image 1 / Image 2
These scrollable windows identify the Firmware numbers, versions, and release dates that
comprise the aggregate image load.
Figure 6-8. Admin | Firmware | Base Modem page
6–19
Revision 13
MN-CDM625
Advertisement
Table of Contents
