Util: Fast (Fast Code Options); Util: Fast) Cnfg (Fast Configuration) - Comtech EF Data CDM-570 Installation And Operation Manual

CDM-570/570L Satellite Modem with Optional IP Module
Front Panel Operation
5.2.2.6.10

UTIL: FAST (FAST Code Options)

For more information about enabling FAST options, see Appendix C. FAST
ACTIVATION PROCEDURE.
FAST (Fully Accessible System Topology) provides the means to enable new options in the
modem. Contact Comtech EF Data during normal business hours to obtain the FAST Access
Code for the desired option.
FAST:Cnfg View (H/W 0.03)
MainBoard S/N: 123456789
The FAST menu allows you to configure (enter) a new FAST Access Code into the modem, view
which options are currently installed, and enable Demo Mode. Additionally, this display provides
the Hardware Revision Number on the top line, and the Main Board Serial Number on the bottom
line.
Note: The Main Board Serial Number is a unique identifier for the FAST upgrade process and is
different from the Chassis Serial Number. This number is required in order to obtain a new FAST
Access Code from Comtech EF Data Customer Support.
Use the ◄ ► arrow keys to select Cnfg or View, and then press ENTER.

5.2.2.6.10.1 (UTIL: FAST) Cnfg (FAST Configuration)

FAST Configuration:
Edit Code
Use the ◄ ► arrow keys to select Edit Code or Demo Mode, and then press ENTER.
(UTIL: FAST) FAST Configuration: Edit Code
Edit 20 digit FAST Code:
00000000000000000000 ENT
To enable new FAST options in the modem, you must first obtain the FAST Access Code for
the new option from Comtech EF Data Customer Support. Once obtained, the FAST Access
Code must be entered carefully. First, use the
then use the
has been fully entered.
If the FAST Access Code is entered correctly, the modem accepts the code and displays the
message "Configured correctly." as follows:
Configured Successfully
Demo Mode
arrow keys to edit that digit. Press ENTER when the FAST Access Code
▲ ▼
(ENTER or CLEAR)
◄ ► arrow keys to select a digit to edit, and
5–50
Revision 12
MN/CDM570L.IOM